Double pantograph + telescope · flagship reach
Cela Essential 24P
The flagship of the
- Working height
- 24 m
- Floor height
- 22 m
- Outreach @ 100 kg
- 12.5 m
- Basket load
- 300 kg
Why it wins
24 m on a B licence
The height that normally demands a 7.5 t chassis and a C-licence driver, delivered at 3.5 t — any operator in the fleet can drive it to site.
Reach and up-and-over together
12.5 m of outreach with 100 kg still in the basket, plus 9.5 m of up-and-over height overhang to clear rooflines and obstacles.
Flagship height, compact body
Barely 7.6 m long and under 3 m tall: a 24-metre machine that parks, travels and stabilises like a much smaller truck.
Technical data
| Maximum working height | 24.00 m |
|---|---|
| Maximum basket floor height | 22.00 m |
| Maximum working outreach | 12.50 m (100 kg) |
| Height overhang (up-and-over) | 9.50 m |
| Maximum load in the basket | 300 kg |
| Turret rotation | 225° + 225° (non-continuous) |
| Basket hydraulic rotation | ±90° |
| Aluminium basket | 1400 × 700 × 1100 mm |
| Stabilisation | |
| Jacking capability | Up to 8° recovered by the stabilisers + 3° in operation |
| Chassis | 3.5 t GVW — Also available on |
| Overall length | ~7,640 mm |
| Overall height | ~2,990 mm |
Working height and outreach can vary by +/−5% depending on operating conditions. Technical data indicative — see the official data sheet.
Standard warranty 12 months · Delivery ex works

Standard equipment
Everything below is standard equipment on the
Aluminium basket
Light 1400 × 700 × 1100 mm aluminium basket: full working space and 300 kg capacity for two operators, with less dead weight on the boom.
Automatic folding (Home function)
One command returns the boom to its transport cradle automatically — perfect stowing at the end of every job, with no closing sequence to remember.
Automatic jacking from basket and ground
Self-levelling outrigger deployment started from either control station: the machine sets itself up correctly in moments, on the first attempt.
Outrigger pads with their cage
The outrigger pads travel in their own cage on the truck: always at hand, nothing extra to load.
Cables and hoses inside telescope
All hydraulic hoses and electrical cables run protected inside the boom profile: nothing to snag on structures, far less wear, easier cleaning.
Anti-dust brushes on the boom
Brushes protect the boom: they keep dust and dirt away from the telescopic slides and extend the life of the sliding pads.
Turret rotation 225° + 225°
225° each way, non-continuous: the basket reaches the work points around the truck without repositioning the vehicle.
Hydraulic basket rotation ±90°
Turn the basket hydraulically to face the work squarely — full 180° of adjustment without moving the boom or the truck.
Front-mounted basket
On the P series the basket is mounted at the front of the boom: direct access to the work point.
Authorised exit at height
On the P series the operator can step out of the basket at height safely (manufacturer's self-certification).
Ergonomic panels (ground and basket)
Identical, clearly laid-out control panels at both stations: one logic to learn for the whole crew, fewer errors under pressure.
Wired ground control
Wired controls from the ground to set up and operate: the operator can run the machine from outside the basket too.
Truck cabin anti-crash system
Electronic supervision stops boom movements before they can reach the truck cabin — protecting the vehicle and the repair budget.
Air or water connection in basket
A dedicated air/water line piped up the boom feeds pneumatic tools or washing lances directly at height.
Clearance lights
High-visibility clearance lighting keeps the vehicle outline clearly marked during road transfer and early-morning or night set-ups.
Electronic slope sensor
Constantly monitors chassis inclination during set-up and work, keeping stabilisation inside safe limits — with the stabilisers recovering slopes of up to 8°.
230 V socket with RCD in the basket
Mains power available at height for drills, grinders, lamps and chargers — no extension cord dangling down the boom.
12 Vdc socket in basket
Low-voltage supply in the basket for radios, chargers and accessories, straight from the machine.
Safety hydraulic handpump
Manual emergency pump: the basket can always be brought down safely, even with the engine stopped or complete power loss.
Safety valves flanged on all cylinders
Mounted directly on each cylinder, with no hose in between: the boom holds its position even in the event of a hydraulic line failure.
Automatic PTO release system
The power take-off disengages by itself when it should: the driveline is protected from oversight, every single day.
Centring indicator light
Tells the operator at a glance when the boom is centred — quick, certain checks before stowing or driving off.
Proportional hydraulic control valve
Proportional hydraulic control: smooth, precise movements metered by the lever, with the basket empty or fully loaded.
Cataphoresis + powder coating
The full structure is immersed in a cataphoresis anti-corrosion bath, then powder coated: automotive-grade protection that keeps its finish — and its resale value — for the whole fleet life.
RAL 7036 and RAL 9005 finish
Aerial structure in grey RAL 7036, subframe in black RAL 9005.
Warning sound signal
An acoustic signal warns when the machine is not in transport configuration: a clear reminder before taking to the road.

The Essential range at the factory
Distributors wanted
The
